Celebrating 11 years in business is more than just a milestone—it’s a testament to dedication, passion, and hard work. As we reflect on this journey, it’s impossible not to think about the challenges we’ve faced, the lessons we’ve learned, and the incredible support from our community that’s brought us to this point. It hasn’t always been easy, but every step of the way has shaped who we are today. This anniversary isn’t just about marking time; it’s a chance to celebrate the grit and determination that’s kept us going all these years. This June 1st, we’re excited to celebrate our 11th anniversary at Trackspec! Before the festivities begin, I want to take a moment to reflect on our journey and honor how far we’ve come.
We were thrilled to finally attend the West Coast Lotus Meet, hosted by the Golden Gate Lotus Club, and it truly exceeded our expectations! Jon and I have long wanted to join this event, but in the past, scheduling conflicts, distance, and not owning a street-legal Lotus kept us away. To be clear, you don’t need to own a Lotus to participate. The Golden Gate Lotus Club is incredibly inclusive, welcoming all makes and models. However, there’s something extra special about fully immersing yourself in the activities when you have a Lotus to share the experience with. What made this event even more special was our decision to close the shop and bring our entire team along to join the experience. We had an incredible time!
It’s been a while since we had an update on this car and a lot of people were starting to wonder what happened to it. Between the many obstacles to overcome, developing some custom parts, going back and forth on decisions, the owner of the car (and myself) having two having kids, this became a sideline project in the shop. Our usual chats shifted from the K20 swap to sharing our experiences raising two young children. Although progress was made slowly throughout, I wanted Part 3 to be the final part of the blog.
The team arrived back in Colorado Springs on Saturday, June 15th and we were greeted at COS airport by some really cool window artwork promoting this year’s race. After leaving the airport, we immediately headed over to our home-away-from-home: Winslow BMW of Colorado Springs and we were met with another fun surprise; this year’s “Signature” car, a BMW Z3M coupe and “Parade of Champions” car, a new BMW i5 M60 electric performance sedan. The liveries for both cars were unique for the 102nd Running of the Pikes Peak International Hill Climb. Legendary PPIHC Hall Of Fame Inductee, Clint Vahsholtz, was this year’s driver of the “Parade of Champions” car; which meant that after the race on Sunday he would lead all of the competitors down from the summit of the mountain back to the start-line. It’s an incredible honor, and I can think of no one better for the job considering Clint has raced Pikes Peak 30 times. And out of those 30 times, he’s won his class 24 times and he was King of the Mountain in 2020. Wow!
Following several successful planned test days at our home track of Sonoma Raceway in April and May, we finally arrived at the first Official Test Weekend ahead of the 102nd Running of the Pikes Peak International Hill Climb (PPIHC). This weekend took place on Saturday and Sunday June 1st-2nd, and as a rookie I was informed by the event-organizers that my performance across both days would be evaluated in order to make a final determination of my eligibility to race on June 23rd. No pressure or anything, but game on.
This blog post will be shorter than usual because our race weekend ended early at Sonoma Raceway due to the Kincade fire. On Sunday morning, just before 8am everyone vacated the track to make room for it to become an evacuation center for families who were fleeing the flames. Our hearts go out to all of them and to our brave service men and women. This meant that the final race of the 2019 Super Touring season actually took place on Saturday, October 26th.
Fuel starvation is a well known problem with this platform. It’s mostly noticeable on long left hand corners because the fuel pick up is on the left side of the tank. It’s typically not an issue if I keep the fuel tank full, but every time our got down to about 70%, it would starve. This can cause a lean condition and be harmful to the engine, especially with forced induction.
Over the years, my good friend Nick Cahill (who happens to be an award-winning filmmaker and national geographic cover photographer) has helped me tell stories through video about my passion for motorsport (which he also shares) and the Honda S2000 race-car I built from the ground up. Last October, I had a nasty rollover crash at Sonoma and while I was able to walk away unharmed; the car was a total-loss. This season, I debuted a BMW E36 M3 which has presented a new set of challenges. That's when Nick and I got together to brainstorm the idea of creating a short-film about this next chapter, and more importantly; the incredible people and companies who make everything possible. Watch it here:
After less-than-ideal results last month, the team regrouped as planned in an effort to come back stronger than ever. On September 6th, we returned to Sonoma Raceway; anxious to test some of the changes that had been made. In an effort to see if we had truly succeeded in making the car better, we decided to run the entire day on the same set of tires from Sunday (August 4th) at Thunderhill.
The Exige S is known for heat soaking and extremely high IATs (intake air temps). The stock intercooler is mounted on top of the hot engine and doesn’t get nearly enough airflow through the small roof scoop. It also doesn’t help that the hot air from the radiator exits in front of the windshield and makes its way into the roof. There are some things you can do to help like a larger intercooler, additional ducting from the side scoops, larger roof scoops, or adding fans to the intercooler…
When 4 out of 5 cars from your team are damaged after a race weekend, you know that some stuff went down. We were really excited about this weekend at Thunderhill because the weather looked dry, albeit hot (105F), and we had just confirmed a week earlier while testing at Buttonwillow that any overheating issues had been resolved (we upgraded a lot of things after Round 4 at Sonoma in June). This would also be my first time driving the E36 at Thunderhill (since Graham had covered for me there during Round 2 in April while I was in Japan).
This past Monday, June 24, we decided to take a team day-off to go to the track with Golden Gate Lotus Club. In addition to drives, meets, and fun outings, GGLC hosts great track & autocross events. Only three run groups, so you get SEVEN sessions! Not to mention, they always offer snacks, coffee, fruits, and sometimes even lunch!
As a Lotus mechanic for the last 9 years and recently becoming a first-time owner, we were able to attend one of the days of the annual West Coast Lotus Meet this year! On Thursday, May 16, 2019, We participated in the trackday portion of the event, which was held at Thunderhill West, and hosted by Golden Gate Lotus Club.
“Heidi” left for Round 2 of NorCal Super Touring Championship a day earlier than usual because Tom was in Japan - which meant that Graham assumed driving duties for this particular race weekend. We were excited because Jon had rebuilt the engine with brand new rod bearings, a new oil pump, and added an accusump system to help mitigate the low oil pressure issues we ran into at Sonoma in March. Shout-out to Jim from MMI Vehicle Systems and West Coast Ravenol for the fresh parts and fluids! On Thursday evening, Liam and Graham stopped by the shop to pick up the car and then they were off to Thunderhill.
It’s no secret that Reverie makes high quality (wind tunnel tested) aero parts for the Eliges and I’ve always liked their front splitter design. Although Reverie’s mounting solution works great and is solid, I decided to attach the splitter directly to the chassis, and not to the front clam. My reason for this is so that I can easily remove the front clam without having to remove the splitter first. This did require cutting the front lower portion of it so that it could just rest on top of the splitter…
Monday through Friday
7am to 4pm
