Jon Vo
Trackspec's K24 Exige- Brake Bias Cage

About two years ago, we decided to run a 15/17” wheel stagger for more tire selection, and in doing so, we had to install smaller front calipers (More detail on that here). The Cup brakes that our S240 came with were too big for 15” wheels. We were able to get a few 15” wheels to fit over them, but it required running some large wheel spacers. The set up we decided on were the AP Radical front calipers and the OEM 2 Pot calipers in the rear. Since the changes, the brakes never felt as good as the stock set up. The larger calipers require more fluid volume, and with the stock master cylinder, that meant the pedal had more travel and felt softer. We also noticed more ABS “ice mode”, which could be related to the change in brake bias and front to rear tire diameter.

Trackspec's K24 Exige- Brake Bias Cage
Motorsports, Featured Cars
Tom Tang
For Immediate Release: Tom Tang and Team ...

I am thrilled to announce the return of Toyo Tires to our race program for the 2023 and 2024 seasons. I have had the pleasure of working with Toyo for many years previously, and this partnership renewal marks a commitment on both sides for shared success. 

For Immediate Release: Tom Tang and Team Trackspec Autosports to summit Pikes Peak with Toyo Tires in 2024
Motorsports, Featured Cars
Tom Tang
Podium Finish (3rd in E1 Class), 9th Overall: ...

You’ve probably already seen the results online, 3rd in class (E1) and 9th overall. But what you don’t know are all of the details, the drama, the trials and tribulations and the blood, sweat, and tears that went into this past weekend. Fortunately, that’s what this blog is for…so please, read on.

Podium Finish (3rd in E1 Class), 9th Overall: NASA 25 Hours of Thunderhill
Motorsports
Tom Tang
P2 and P5 in ST4 for our E46 M3 on the Yokohama ...

This year seems to be just flying by. We last raced at the end of March, and since then the team has been busy with a wide variety of cool projects at the shop. Personally, my calendar has been filled with work, travel, and everything in between. One event in particular that transpired during this time was the official launch of the Yokohama A055 tire.

P2 and P5 in ST4 for our E46 M3 on the Yokohama A055
Featured Cars
Jon Vo
Last 111, First Street Legal K20 Swap? (Part 2)

Before doing anything K-swap related to the new chassis, we started by transferring parts over from the original tub to the new one. Since this was a low mileage car, it wasn’t difficult selling the drivetrain. Timing worked out perfectly as there was another Elise in our shop needing a motor due to a failure.

Last 111, First Street Legal K20 Swap? (Part 2)

teckwrap strawberry

, ,

Trackspec's Exige S240 Project: Part 3, More Goodies

, ,
Trackspec's Exige S240 Project: Part 3, More Goodies

It’s no secret that Reverie makes high quality (wind tunnel tested) aero parts for the Eliges and I’ve always liked their front splitter design. Although Reverie’s mounting solution works great and is solid, I decided to attach the splitter directly to the chassis, and not to the front clam. My reason for this is so that I can easily remove the front clam without having to remove the splitter first. This did require cutting the front lower portion of it so that it could just rest on top of the splitter…

hours

Monday through Friday
7am to 4pm