Trackspec's Exige S240 Project: Part 10, K24 Swap (1)
If you grew up in the 90s and were into cars, then you’ve heard of the Honda B-series engine and how amazing it was. It was the “hot rod” engine of its time and my gateway into modifying cars. The planning, researching, parts sourcing, building, and then seeing how it improved the car’s performance is what got me hooked. In the early 2000’s, Honda came out with something even better..
Trackspec's Exige S240 Project Part 9, Brakes
In Part 8, we were waiting on a driver net before we could have the tech inspection done. The Schroth net with the new quick release mechanism that we originally ordered was still undergoing testing and its availability was severely delayed. So, we went with a equally good option- Safecraft.
Hard-charged our way onto the first podium of 2020
We love the start of every race season because it represents new possibilities. In winter of 2019, we decided that 2020 is going to be a year where we’ll be more focused on endurance racing. While we love the NASA Super Touring (sprint racing) series, we realized we enjoy enduros even more. As a team, we are aiming to win (our class), podium, or at the very least finish the 25 Hours of Thunderhill with my E36 BMW M3, “Heidi.” So, that’s what we’ve set out to do.
Trackspec's Exige S240 Project Part 8, Roll Cage
With a year of rebuilding and developing the Exige behind us, we were excited to begin our “winter project,” the roll cage. When the car came back from the last track event of the year (a very wet Laguna day), we gave it a good wash inside and out before getting into it. We also had to do some homework and make sure that what we build is safe and legal for the the local sanctioning bodies we plan to race with. We followed NASA’s Club Codes and Regulations handbook as a guide.
Trackspec's Exige S240 Project: Part 7, Clutch, Trans, Misc.
At the last two-day track day at Buttonwillow with Speed Ventures, shifting in the Exige started to get notchy. It would sometimes be difficult to get into gear, but we kept driving it. By the last session of the day, we were not able to get the car into gear after pulling off into paddock. If the engine was off, it would go into all gears, so we suspected it to be a failed clutch that was not fully disengaging...
Trackspec's Exige S240 Project: Part 6, Fuel and Oil Control
Fuel starvation is a well known problem with this platform. It’s mostly noticeable on long left hand corners because the fuel pick up is on the left side of the tank. It’s typically not an issue if I keep the fuel tank full, but every time our got down to about 70%, it would starve. This can cause a lean condition and be harmful to the engine, especially with forced induction.
VIDEO: The Next Chapter
Over the years, my good friend Nick Cahill (who happens to be an award-winning filmmaker and national geographic cover photographer) has helped me tell stories through video about my passion for motorsport (which he also shares) and the Honda S2000 race-car I built from the ground up. Last October, I had a nasty rollover crash at Sonoma and while I was able to walk away unharmed; the car was a total-loss. This season, I debuted a BMW E36 M3 which has presented a new set of challenges. That's when Nick and I got together to brainstorm the idea of creating a short-film about this next chapter, and more importantly; the incredible people and companies who make everything possible. Watch it here:
Trackspec's Exige S240 Project: Part 5, Cooling
The Exige S is known for heat soaking and extremely high IATs (intake air temps). The stock intercooler is mounted on top of the hot engine and doesn’t get nearly enough airflow through the small roof scoop. It also doesn’t help that the hot air from the radiator exits in front of the windshield and makes its way into the roof. There are some things you can do to help like a larger intercooler, additional ducting from the side scoops, larger roof scoops, or adding fans to the intercooler…
Trackspec's Exige S240 Project: Part 4, Completed Aero
This past Monday, June 24, we decided to take a team day-off to go to the track with Golden Gate Lotus Club. In addition to drives, meets, and fun outings, GGLC hosts great track & autocross events. Only three run groups, so you get SEVEN sessions! Not to mention, they always offer snacks, coffee, fruits, and sometimes even lunch!
NASA ST4 Round 3 At Sonoma Raceway
Our team spent the last few weeks (after a less than ideal weekend at Thunderhill last month) busy preparing for Round 3 of the 2019 Super Touring Championship season at Sonoma Raceway by making some significant improvements to “Heidi.”
West Coast Lotus Meet x GGLC Thunderhill West
As a Lotus mechanic for the last 9 years and recently becoming a first-time owner, we were able to attend one of the days of the annual West Coast Lotus Meet this year! On Thursday, May 16, 2019, We participated in the trackday portion of the event, which was held at Thunderhill West, and hosted by Golden Gate Lotus Club.
NASA ST4 Round 2 at Thunderhill Raceway
“Heidi” left for Round 2 of NorCal Super Touring Championship a day earlier than usual because Tom was in Japan - which meant that Graham assumed driving duties for this particular race weekend. We were excited because Jon had rebuilt the engine with brand new rod bearings, a new oil pump, and added an accusump system to help mitigate the low oil pressure issues we ran into at Sonoma in March. Shout-out to Jim from MMI Vehicle Systems and West Coast Ravenol for the fresh parts and fluids! On Thursday evening, Liam and Graham stopped by the shop to pick up the car and then they were off to Thunderhill.