About two years ago, we decided to run a 15/17” wheel stagger for more tire selection, and in doing so, we had to install smaller front calipers (More detail on that here). The Cup brakes that our S240 came with were too big for 15” wheels. We were able to get a few 15” wheels to fit over them, but it required running some large wheel spacers. The set up we decided on were the AP Radical front calipers and the OEM 2 Pot calipers in the rear. Since the changes, the brakes never felt as good as the stock set up. The larger calipers require more fluid volume, and with the stock master cylinder, that meant the pedal had more travel and felt softer. We also noticed more ABS “ice mode”, which could be related to the change in brake bias and front to rear tire diameter.
I am thrilled to announce the return of Toyo Tires to our race program for the 2023 and 2024 seasons. I have had the pleasure of working with Toyo for many years previously, and this partnership renewal marks a commitment on both sides for shared success.
You’ve probably already seen the results online, 3rd in class (E1) and 9th overall. But what you don’t know are all of the details, the drama, the trials and tribulations and the blood, sweat, and tears that went into this past weekend. Fortunately, that’s what this blog is for…so please, read on.
This year seems to be just flying by. We last raced at the end of March, and since then the team has been busy with a wide variety of cool projects at the shop. Personally, my calendar has been filled with work, travel, and everything in between. One event in particular that transpired during this time was the official launch of the Yokohama A055 tire.
Before doing anything K-swap related to the new chassis, we started by transferring parts over from the original tub to the new one. Since this was a low mileage car, it wasn’t difficult selling the drivetrain. Timing worked out perfectly as there was another Elise in our shop needing a motor due to a failure.
It’s been over 3 years since I put the Honda K24 into our Lotus Exige and it was the first car that I made an engine harness for. Although the harness was reliable and never gave me any issues, I felt that my harness building skills have improved much since then. What I really wanted to do was get rid of all of the unused wiring and the mess under the dash.
A few months ago, we decided to register for this year’s 2021 Global Time Attack and Super Lap Battle Finals at Buttonwillow. The Exige wasn’t built for time attack, but we thought it would be a fun place to compete and see how capable the Lotus with a K-series really is; even if it is heavily outgunned in its class (because of the rule set, the car falls into Limited, a class that normally sees cars with forced induction engine setups making well over 600whp). We decided to set our own goal of a sub 1:50 lap, which may be the first naturally aspirated Elige to do so. The best time this car had done previously at Buttonwillow 13CW was a 1:51.7 on Falken RT660s.
With the 25 Hours of Thunderhill postponed to 2021 (thanks, COVID) the final race weekend of the year took place at Buttonwillow in the form of a double header, Super Touring sprint racing and a 3 hour and 15 minute night endurance race as part of the Western Racing Endurance Racing Championships. We were able to use the month of September to properly prep both the Lotus Exige and the E36 BMW M3.
With a year of rebuilding and developing the Exige behind us, we were excited to begin our “winter project,” the roll cage. When the car came back from the last track event of the year (a very wet Laguna day), we gave it a good wash inside and out before getting into it. We also had to do some homework and make sure that what we build is safe and legal for the the local sanctioning bodies we plan to race with. We followed NASA’s Club Codes and Regulations handbook as a guide.
Monday through Friday
7am to 4pm
